| Manual |
Page | Description |
| Tru64 5.1 (OSF/1) |
LSM(8) |
Introduction to Logical Storage Manager (LSM) terms and commands |
| Tru64 5.1 (OSF/1) |
MAKEDEV(8) |
makes system special files |
| Tru64 5.1 (OSF/1) |
SYSV_PTY(8) |
Makes the system use the SVR4 pseudo terminal name space |
| Tru64 5.1 (OSF/1) |
ac(8) |
Outputs connect-session records |
| Tru64 5.1 (OSF/1) |
acct(8) |
Provide accounting commands for shell scripts |
| Tru64 5.1 (OSF/1) |
acctcms(8) |
Produces command usage summaries from accounting records |
| Tru64 5.1 (OSF/1) |
acctcom(8) |
Displays selected process accounting record summaries |
| Tru64 5.1 (OSF/1) |
acctcon(8) |
Display connect-time accounting summaries |
| Tru64 5.1 (OSF/1) |
acctcon1(8) |
Display connect-time accounting summaries |
| Tru64 5.1 (OSF/1) |
acctcon2(8) |
Display connect-time accounting summaries |
| Tru64 5.1 (OSF/1) |
acctdisk(8) |
Perform disk-usage accounting |
| Tru64 5.1 (OSF/1) |
acctdusg(8) |
Perform disk-usage accounting |
| Tru64 5.1 (OSF/1) |
acctmerg(8) |
Merges total-accounting files into an intermediary file or a daily accounting file |
| Tru64 5.1 (OSF/1) |
accton(8) |
Perform process-accounting procedures |
| Tru64 5.1 (OSF/1) |
acctprc(8) |
Perform process-accounting procedures |
| Tru64 5.1 (OSF/1) |
acctprc1(8) |
Perform process-accounting procedures |
| Tru64 5.1 (OSF/1) |
acctprc2(8) |
Perform process-accounting procedures |
| Tru64 5.1 (OSF/1) |
acctwtmp(8) |
Modify connect time accounting records to change formats and to make corrections in the records |
| Tru64 5.1 (OSF/1) |
addgroup(8) |
Adds a new group interactively |
| Tru64 5.1 (OSF/1) |
adduser(8) |
Adds a new user interactively |
| Tru64 5.1 (OSF/1) |
addvol(8) |
Adds a volume to an existing file domain |
| Tru64 5.1 (OSF/1) |
advfsd(8) |
Starts the AdvFS graphical user interface (GUI) daemon |
| Tru64 5.1 (OSF/1) |
advfsstat(8) |
Displays AdvFS performance statistics |
| Tru64 5.1 (OSF/1) |
advscan(8) |
Locates AdvFS volumes on disk devices |
| Tru64 5.1 (OSF/1) |
ap(8) |
Parses addresses RFC 822-style |
| Tru64 5.1 (OSF/1) |
apcupsd(8) |
|
| Tru64 5.1 (OSF/1) |
arp(8) |
Displays and controls Address Resolution Protocol (ARP) tables |
| Tru64 5.1 (OSF/1) |
atmarp(8) |
Creates ATM Logical IP Subnet (LIS) interface, configures the ATM Address Resolution Protocol (ARP) module, and configures and displays the ATM ARP table |
| Tru64 5.1 (OSF/1) |
atmconfig(8) |
Configures the ATM subsystem |
| Tru64 5.1 (OSF/1) |
atmelan(8) |
Configures LAN-Emulation clients as network interfaces. |
| Tru64 5.1 (OSF/1) |
atmifmp(8) |
Configures the ATM subsystem for switching IP traffic only |
| Tru64 5.1 (OSF/1) |
atmsetup(8) |
Configures Asynchronous Transfer Mode (ATM) adapters and services |
| Tru64 5.1 (OSF/1) |
atmsig(8) |
Allows the configuration and management of the UNI signaling module |
| Tru64 5.1 (OSF/1) |
audgen(8) |
Generates an audit record |
| Tru64 5.1 (OSF/1) |
audit_setup(8) |
Audit subsystem configuration graphical interface (Enhanced Security) |
| Tru64 5.1 (OSF/1) |
audit_tool(8) |
Audit log reduction tool |
| Tru64 5.1 (OSF/1) |
audit_tool.ultrix(8) |
Audit log reduction tool |
| Tru64 5.1 (OSF/1) |
auditconfig(8) |
Audit subsystem configuration graphical interface (Enhanced Security) |
| Tru64 5.1 (OSF/1) |
auditd(8) |
Audit daemon |
| Tru64 5.1 (OSF/1) |
auditmask(8) |
Gets or sets audit masks |
| Tru64 5.1 (OSF/1) |
authck(8) |
Checks internal consistency of the authentication databases (Enhanced Security) |
| Tru64 5.1 (OSF/1) |
autofs(8) |
Automatically and transparently mounts and unmounts NFS file systems |
| Tru64 5.1 (OSF/1) |
autofsd(8) |
Automatically and transparently mounts and unmounts NFS file systems |
| Tru64 5.1 (OSF/1) |
autofsmount(8) |
Installs and removes AutoFS intercept points |
| Tru64 5.1 (OSF/1) |
automount(8) |
Automatically and transparently mounts and unmounts NFS file systems |
| Tru64 5.1 (OSF/1) |
autopush(8) |
Manages the system's database of automatically pushed STREAMS modules |
| Tru64 5.1 (OSF/1) |
autosysconfig(8) |
Maintains the list of dynamic kernel subsystems that are automatically configured |
| Tru64 5.1 (OSF/1) |
badsect(8) |
Creates files to contain bad sectors |
| Tru64 5.1 (OSF/1) |
balance(8) |
Balances the percentage of used space among volumes in a domain. |
| Tru64 5.1 (OSF/1) |
bcheckrc(8) |
Command script for checking and mounting local file systems |
| Tru64 5.1 (OSF/1) |
bindconfig(8) |
Configures BIND services for a single system or cluster |
| Tru64 5.1 (OSF/1) |
binlogd(8) |
Binary event-log daemon |
| Tru64 5.1 (OSF/1) |
biod(8) |
The local NFS compatible asynchronous I/O daemon |
| Tru64 5.1 (OSF/1) |
bootpd(8) |
Internet Boot Protocol (BOOTP) server |
| Tru64 5.1 (OSF/1) |
bootpgw(8) |
Internet BOOTP Protocol gateway |
| Tru64 5.1 (OSF/1) |
bprelay(8) |
BOOTP relay agent |
| Tru64 5.1 (OSF/1) |
bptojdb(8) |
Converts bootptab entries into permanent, static IP entries for JOIN databases. |
| Tru64 5.1 (OSF/1) |
btcreate(8) |
Builds a bootable Standalone System (SAS) kernel on tape |
| Tru64 5.1 (OSF/1) |
btextract(8) |
Extracts the file systems from tape in single-user mode in memory |
| Tru64 5.1 (OSF/1) |
bttape(8) |
Bootable Tape Creation utility |
| Tru64 5.1 (OSF/1) |
catman(8) |
Creates or rebuilds formatted reference pages and the whatis database |
| Tru64 5.1 (OSF/1) |
cddevsuppl(8) |
Sets and gets the major and minor numbers of a device file on a Rock Ridge format CD-ROM |
| Tru64 5.1 (OSF/1) |
cdmntsuppl(8) |
Sets and gets administrative CD-ROM features |
| Tru64 5.1 (OSF/1) |
cdslinvchk(8) |
Checks the CDSL inventory of the base operating system and layered applications. |
| Tru64 5.1 (OSF/1) |
cfgmgr(8) |
Configuration management server |
| Tru64 5.1 (OSF/1) |
chargefee(8) |
Provide accounting commands for shell scripts |
| Tru64 5.1 (OSF/1) |
chat(8) |
Automated conversational script with a modem |
| Tru64 5.1 (OSF/1) |
checkdba(8) |
Check the JOIN IP address lease database for internal consistency |
| Tru64 5.1 (OSF/1) |
chfile(8) |
changes attributes of AdvFS files |
| Tru64 5.1 (OSF/1) |
chfsets(8) |
Changes limits for fileset quotas |
| Tru64 5.1 (OSF/1) |
chroot(8) |
Changes the root directory of a command |
| Tru64 5.1 (OSF/1) |
chvol(8) |
changes the attributes of a volume |
| Tru64 5.1 (OSF/1) |
ckpacct(8) |
Provide accounting commands for shell scripts |
| Tru64 5.1 (OSF/1) |
class_admin(8) |
Administer class scheduling and the database. |
| Tru64 5.1 (OSF/1) |
clonefset(8) |
Creates a read-only copy of an AdvFS fileset |
| Tru64 5.1 (OSF/1) |
clri(8) |
Clears i-nodes |
| Tru64 5.1 (OSF/1) |
clu_get_info(8) |
Gets information about a cluster and its members |
| Tru64 5.1 (OSF/1) |
cmx(8) |
Generic communication exerciser |
| Tru64 5.1 (OSF/1) |
collect(8) |
Collects data that describes the current system status |
| Tru64 5.1 (OSF/1) |
comsat(8) |
The biff server |
| Tru64 5.1 (OSF/1) |
config(8) |
Builds system configuration files |
| Tru64 5.1 (OSF/1) |
conflict(8) |
search for alias/password conflicts |
| Tru64 5.1 (OSF/1) |
consvar(8) |
Manipulate system firmware console environment variables |
| Tru64 5.1 (OSF/1) |
convauth(8) |
convert security authorization databases into database format |
| Tru64 5.1 (OSF/1) |
convuser(8) |
convert user profile information between BASE and ENHANCED formats |
| Tru64 5.1 (OSF/1) |
cp382dof(8) |
Filter for Traditional Chinese CP382 printer controller |
| Tru64 5.1 (OSF/1) |
cpq_mibs(8) |
Tru64 UNIX SNMP subagent daemon for Compaq MIBS |
| Tru64 5.1 (OSF/1) |
crashdc(8) |
Diagnostic data collection for a running or crashed system |
| Tru64 5.1 (OSF/1) |
cron(8) |
The system clock daemon |
| Tru64 5.1 (OSF/1) |
db_archive(8) |
displays security database log files no longer involved in active transactions (Enhanced Security) |
| Tru64 5.1 (OSF/1) |
db_checkpoint(8) |
Periodically checkpoint the security database log (Enhanced Security) |
| Tru64 5.1 (OSF/1) |
db_dump(8) |
Reads and writes the security databases (Enhanced Security) |
| Tru64 5.1 (OSF/1) |
db_dump185(8) |
Reads and writes the security databases (Enhanced Security) |
| Tru64 5.1 (OSF/1) |
db_load(8) |
Loads standard input to a database files (Enhanced Security) |
| Tru64 5.1 (OSF/1) |
db_printlog(8) |
Displays database log file (Enhanced Security) |
| Tru64 5.1 (OSF/1) |
db_recover(8) |
Restores the database to a consistent state (Enhanced Security) |
| Tru64 5.1 (OSF/1) |
db_stat(8) |
Displays statistics for the database files (Enhanced Security) |
| Tru64 5.1 (OSF/1) |
dcheck(8) |
Checks directory consistency |
| Tru64 5.1 (OSF/1) |
ddr_config(8) |
Compile and display the SCSI CAM I/O device database |
| Tru64 5.1 (OSF/1) |
defragcron(8) |
Schedules AdvFS file domains for defragmenting |
| Tru64 5.1 (OSF/1) |
defragment(8) |
Makes the files in a file domain more contiguous |
| Tru64 5.1 (OSF/1) |
deliver(8) |
Delivers mail to an IMAP mailbox |
| Tru64 5.1 (OSF/1) |
depord(8) |
Sort subset names into dependency order |
| Tru64 5.1 (OSF/1) |
devswmgr(8) |
utility to manage the device switch database |
| Tru64 5.1 (OSF/1) |
dhcpcemu(8) |
Emulate a DHCP client |
| Tru64 5.1 (OSF/1) |
dhcpconf(8) |
Controller for DHCP client configuration |
| Tru64 5.1 (OSF/1) |
dhcpparm(8) |
Daemon for client configuration |
| Tru64 5.1 (OSF/1) |
dirclean(8) |
|
| Tru64 5.1 (OSF/1) |
diskconfig(8) |
Manages the configuration of disks on the system |
| Tru64 5.1 (OSF/1) |
disklabel(8) |
Reads and writes disk pack label |
| Tru64 5.1 (OSF/1) |
diskusg(8) |
Generates disk accounting data by user ID |
| Tru64 5.1 (OSF/1) |
diskx(8) |
disk exerciser program |
| Tru64 5.1 (OSF/1) |
dl510kaof(8) |
Filter for the Korean DL510-KA printer |
| Tru64 5.1 (OSF/1) |
dmu(8) |
Dataless management utility |
| Tru64 5.1 (OSF/1) |
doconfig(8) |
Builds the kernel described by system configuration files |
| Tru64 5.1 (OSF/1) |
dodisk(8) |
Provide accounting commands for shell scripts |
| Tru64 5.1 (OSF/1) |
dohash(8) |
Hashes or unhashes IMAP configuration directories |
| Tru64 5.1 (OSF/1) |
dop(8) |
Allows a user to execute a privileged program without knowing the root password. The dop command also modifies the action database. |
| Tru64 5.1 (OSF/1) |
dp(8) |
parse dates RFC 822-style |
| Tru64 5.1 (OSF/1) |
dsfmgr(8) |
Device special file management utility |
| Tru64 5.1 (OSF/1) |
dtadvfs(8) |
Starts the AdvFS graphical user interface |
| Tru64 5.1 (OSF/1) |
dtsetup(8) |
Configure and Customize the Common Desktop Environment (CDE) |
| Tru64 5.1 (OSF/1) |
dump(8) |
Performs incremental file system dumps |
| Tru64 5.1 (OSF/1) |
dumpfs(8) |
Dump UFS file system information |
| Tru64 5.1 (OSF/1) |
dumpsys(8) |
Copies a snapshot of memory to a dump file |
| Tru64 5.1 (OSF/1) |
dupatch(8) |
|
| Tru64 5.1 (OSF/1) |
dxaccounts(8) |
Graphical interface for account administration |
| Tru64 5.1 (OSF/1) |
dxarchiver(8) |
Archives and restores files to and from disk and tape devices |
| Tru64 5.1 (OSF/1) |
dxaudit(8) |
Motif Interface for the Audit Subsystem |
| Tru64 5.1 (OSF/1) |
dxdevices(8) |
Windows interface for device configuration |
| Tru64 5.1 (OSF/1) |
dxdw(8) |
Runs and repeats command line commands |
| Tru64 5.1 (OSF/1) |
dxfileshare(8) |
Exports local directories and mounts directories from the network |
| Tru64 5.1 (OSF/1) |
dxhosts(8) |
Provides host management capabilities for local and remote hosts |
| Tru64 5.1 (OSF/1) |
dxkerneltuner(8) |
Modifies or displays kernel subsystem attributes |
| Tru64 5.1 (OSF/1) |
dxlicenses(8) |
Adds, lists, issues, and deletes software product licenses |
| Tru64 5.1 (OSF/1) |
dxlsm(8) |
Graphical interface, also called the Visual Administrator, for the Logical Storage Manager (LSM) |
| Tru64 5.1 (OSF/1) |
dxpower(8) |
controls energy saving features on systems that can be power managed |
| Tru64 5.1 (OSF/1) |
dxpresto(8) |
Graphically displays Prestoserve state and statistics. |
| Tru64 5.1 (OSF/1) |
dxproctuner(8) |
Manages and monitors system processes |
| Tru64 5.1 (OSF/1) |
dxsetacl(8) |
Graphical interface for setting the ACL on a file or directory |
| Tru64 5.1 (OSF/1) |
dxshutdown(8) |
Performs various types of automated system shutdown. |
| Tru64 5.1 (OSF/1) |
dxsysinfo(8) |
Monitors system information such as CPU activity, memory, swap space, and file system usage |
| Tru64 5.1 (OSF/1) |
edauth(8) |
update and list authentication and capabilities (authcap) database information (Enhanced Security) |
| Tru64 5.1 (OSF/1) |
edquota(8) |
edits quotas |
| Tru64 5.1 (OSF/1) |
emxmgr(8) |
Displays Fibre Channel worldwide name to target ID mappings for emx devices |
| Tru64 5.1 (OSF/1) |
envconfig(8) |
Configures the Environmental Monitoring daemon |
| Tru64 5.1 (OSF/1) |
envmond(8) |
Environmental Monitoring daemon |
| Tru64 5.1 (OSF/1) |
evmchmgr(8) |
Event Manager channel manager |
| Tru64 5.1 (OSF/1) |
evmd(8) |
Event Manager daemon |
| Tru64 5.1 (OSF/1) |
evmlogger(8) |
Event Manager logger |
| Tru64 5.1 (OSF/1) |
evmreload(8) |
Reload Event Manager configuration files |
| Tru64 5.1 (OSF/1) |
evmstart(8) |
Starts the Event Manager |
| Tru64 5.1 (OSF/1) |
evmstop(8) |
Stops the Event Manager |
| Tru64 5.1 (OSF/1) |
evmviewer(8) |
View events |
| Tru64 5.1 (OSF/1) |
expand_dump(8) |
Produces a non-compressed kernel crash dump file |
| Tru64 5.1 (OSF/1) |
extendfs(8) |
Extends UFS file systems |
| Tru64 5.1 (OSF/1) |
fastboot(8) |
Reboots the system without checking file systems |
| Tru64 5.1 (OSF/1) |
fasthalt(8) |
Halts the system |
| Tru64 5.1 (OSF/1) |
fddi_config(8) |
Displays and modifies the Fiber Distributed Data Interface (FDDI) parameters |
| Tru64 5.1 (OSF/1) |
fddisk(8) |
FDI disk maintenance utility |
| Tru64 5.1 (OSF/1) |
fdetach(8) |
Detaches a STREAMS-based file descriptor from a file |
| Tru64 5.1 (OSF/1) |
filterlog(8) |
Logs and reports system Correctable Read Data (CRD) memory errors on specific systems. |
| Tru64 5.1 (OSF/1) |
fingerd(8) |
The user information server for networks |
| Tru64 5.1 (OSF/1) |
fitset(8) |
determines if a software subset fits on a system |
| Tru64 5.1 (OSF/1) |
fixfdmn(8) |
|
| Tru64 5.1 (OSF/1) |
fsck(8) |
Check and repair UFS file systems |
| Tru64 5.1 (OSF/1) |
fsdb(8) |
File system debugger |
| Tru64 5.1 (OSF/1) |
fsx(8) |
file system exerciser |
| Tru64 5.1 (OSF/1) |
ftpd(8) |
Describes File Transfer Protocol server daemon, including anonymous service |
| Tru64 5.1 (OSF/1) |
fuser(8) |
Lists process IDs of processes that are using one or more files or file structures |
| Tru64 5.1 (OSF/1) |
fverify(8) |
verify software subsets |
| Tru64 5.1 (OSF/1) |
fwtmp(8) |
Modify connect time accounting records to change formats and to make corrections in the records |
| Tru64 5.1 (OSF/1) |
fwupgrade(8) |
Updates the system firmware from a loadable firmware image (*.exe or *.sys) |
| Tru64 5.1 (OSF/1) |
gated(8) |
gateway routing daemon |
| Tru64 5.1 (OSF/1) |
gdc(8) |
operational user interface for gated(8) |
| Tru64 5.1 (OSF/1) |
genufi(8) |
Generates a User File Inventory (UFI) file |
| Tru64 5.1 (OSF/1) |
getty(8) |
Sets the terminal type, modes, speed, and line discipline |
| Tru64 5.1 (OSF/1) |
groupadd(8) |
Adds a new group definition |
| Tru64 5.1 (OSF/1) |
groupdel(8) |
Deletes a group definition from the system |
| Tru64 5.1 (OSF/1) |
groupmod(8) |
Modifies a group definition on the system |
| Tru64 5.1 (OSF/1) |
grpck(8) |
Checks the password and group files for inconsistencies |
| Tru64 5.1 (OSF/1) |
halt(8) |
Stops the processor |
| Tru64 5.1 (OSF/1) |
hardware(8) |
|
| Tru64 5.1 (OSF/1) |
hot-swap(8) |
|
| Tru64 5.1 (OSF/1) |
hotswap(8) |
|
| Tru64 5.1 (OSF/1) |
hwmgr(8) |
Command line interface to hardware device data |
| Tru64 5.1 (OSF/1) |
hwmgr_get(8) |
|
| Tru64 5.1 (OSF/1) |
hwmgr_ops(8) |
|
| Tru64 5.1 (OSF/1) |
hwmgr_set(8) |
|
| Tru64 5.1 (OSF/1) |
hwmgr_show(8) |
|
| Tru64 5.1 (OSF/1) |
hwmgr_view(8) |
|
| Tru64 5.1 (OSF/1) |
icheck(8) |
File system storage consistency check |
| Tru64 5.1 (OSF/1) |
ifconfig(8) |
Configures or displays network interface parameters |
| Tru64 5.1 (OSF/1) |
iftcntl(8) |
View and modify network interface traffic control settings |
| Tru64 5.1 (OSF/1) |
ikdebug(8) |
Integrated kernel debugger |
| Tru64 5.1 (OSF/1) |
ils(8) |
Lists files in stl_inv format |
| Tru64 5.1 (OSF/1) |
imapd(8) |
Internet Message Access Protocol (IMAP) server process |
| Tru64 5.1 (OSF/1) |
imapquota(8) |
Reports and fixes mail quota usage |
| Tru64 5.1 (OSF/1) |
inetd(8) |
Internet services daemon |
| Tru64 5.1 (OSF/1) |
init(8) |
Process control initialization |
| Tru64 5.1 (OSF/1) |
insightd(8) |
Insight Manager daemon for Tru64 UNIX |
| Tru64 5.1 (OSF/1) |
install-mh(8) |
initialize the MH environment |
| Tru64 5.1 (OSF/1) |
installupdate(8) |
Invokes the Update Installation procedure |
| Tru64 5.1 (OSF/1) |
intro(8) |
Introduction to system maintenance and operation commands |
| Tru64 5.1 (OSF/1) |
invsync(8) |
Synchronizes system inventory |
| Tru64 5.1 (OSF/1) |
ip6_setup(8) |
IPv6 configuration program |
| Tru64 5.1 (OSF/1) |
ip6rtrd(8) |
IPv6 routing daemon |
| Tru64 5.1 (OSF/1) |
ipf(8) |
|
| Tru64 5.1 (OSF/1) |
ipfs(8) |
|
| Tru64 5.1 (OSF/1) |
ipfstat(8) |
|
| Tru64 5.1 (OSF/1) |
ipmon(8) |
|
| Tru64 5.1 (OSF/1) |
ipnat(8) |
|
| Tru64 5.1 (OSF/1) |
ippool(8) |
|
| Tru64 5.1 (OSF/1) |
iprsetup(8) |
Internet Protocol router setup |
| Tru64 5.1 (OSF/1) |
ipscan(8) |
|
| Tru64 5.1 (OSF/1) |
iptunnel(8) |
Creates, deletes, and displays configured tunnels |
| Tru64 5.1 (OSF/1) |
it(8) |
configure a system after installation |
| Tru64 5.1 (OSF/1) |
itruns(8) |
set up files for use by the it command |
| Tru64 5.1 (OSF/1) |
javaexecutedata(8) |
|
| Tru64 5.1 (OSF/1) |
jdbdump(8) |
Dumps fields from the DHCP dynamic databases. |
| Tru64 5.1 (OSF/1) |
jdbmod(8) |
Adds, modifies, or deletes data in the DHCP dynamic databases. |
| Tru64 5.1 (OSF/1) |
jdbreg(8) |
Registers hosts in the DHCP dynamic databases. |
| Tru64 5.1 (OSF/1) |
jdbshow(8) |
Display the contents of a specific JOIN server database |
| Tru64 5.1 (OSF/1) |
joinc(8) |
Daemon for DHCP client configuration |
| Tru64 5.1 (OSF/1) |
joind(8) |
BOOTP and DHCP server daemon |
| Tru64 5.1 (OSF/1) |
kdbx(8) |
Analyzes running kernels and dump files |
| Tru64 5.1 (OSF/1) |
killall(8) |
Terminates all processes started by the user, except the calling process |
| Tru64 5.1 (OSF/1) |
kkcd(8) |
Daemon that supports the Kana-Kanji conversion service |
| Tru64 5.1 (OSF/1) |
kloadsrv(8) |
Kernel load server |
| Tru64 5.1 (OSF/1) |
kmknod(8) |
Creates device special files for static kernel layered products |
| Tru64 5.1 (OSF/1) |
kopt(8) |
Displays a menu of optional kernel components that can be selected to build into the kernel |
| Tru64 5.1 (OSF/1) |
kreg(8) |
Maintains the system file that registers kernel layered products |
| Tru64 5.1 (OSF/1) |
la280of(8) |
Filter for the Japanese LA280 printer |
| Tru64 5.1 (OSF/1) |
la380cbof(8) |
Simplified Chinese filter for the LA380 printer |
| Tru64 5.1 (OSF/1) |
la380kof(8) |
Filter for the Korean LA380 printer |
| Tru64 5.1 (OSF/1) |
la380of(8) |
Filter for Japanese LA380 printer |
| Tru64 5.1 (OSF/1) |
la84of(8) |
Filter for the Japanese LA84 printer |
| Tru64 5.1 (OSF/1) |
la86of(8) |
Filter for the Japanese LA86 printer |
| Tru64 5.1 (OSF/1) |
la88cof(8) |
Filter for the Simplified Chinese LA88 printer |
| Tru64 5.1 (OSF/1) |
la88of(8) |
Filter for the Japanese LA88 printer |
| Tru64 5.1 (OSF/1) |
la90of(8) |
Filter for the Japanese LA90 printer |
| Tru64 5.1 (OSF/1) |
lagconfig(8) |
|
| Tru64 5.1 (OSF/1) |
lan_config(8) |
Modifies low-level configuration parameters for a given LAN interface |
| Tru64 5.1 (OSF/1) |
last(8) |
Displays information about previous logins |
| Tru64 5.1 (OSF/1) |
lastcomm(8) |
Outputs information about the last commands executed |
| Tru64 5.1 (OSF/1) |
lastlogin(8) |
Provide accounting commands for shell scripts |
| Tru64 5.1 (OSF/1) |
latcp(8) |
Local Area Transport (LAT) Control Program |
| Tru64 5.1 (OSF/1) |
latsetup(8) |
Local Area Transport (LAT) setup utility |
| Tru64 5.1 (OSF/1) |
learp(8) |
Displays the contents of a LAN-Emulation Address Resolution Protocol (LE-ARP) table |
| Tru64 5.1 (OSF/1) |
llconvert(8) |
Modify lastlog records from DIGITAL UNIX releases 4.0x and prior to new format |
| Tru64 5.1 (OSF/1) |
lmf(8) |
License Management Facility (LMF) |
| Tru64 5.1 (OSF/1) |
lmfsetup(8) |
License Management Facility (LMF) registration script |
| Tru64 5.1 (OSF/1) |
ln03jaof(8) |
Filter for the Japanese LN03S-JA printer |
| Tru64 5.1 (OSF/1) |
ln03rof(8) |
ASCII to PostScript translation filter |
| Tru64 5.1 (OSF/1) |
ln05jaof(8) |
Filter for the Japanese DEClaser 2300 printer |
| Tru64 5.1 (OSF/1) |
ln05rof(8) |
ASCII to PostScript translation filter |
| Tru64 5.1 (OSF/1) |
ln06rof(8) |
ASCII to PostScript translation filter |
| Tru64 5.1 (OSF/1) |
ln07rof(8) |
ASCII to PostScript translation filter |
| Tru64 5.1 (OSF/1) |
ln08rof(8) |
ASCII to PostScript translation filter |
| Tru64 5.1 (OSF/1) |
ln09of(8) |
ASCII to PostScript translation filter |
| Tru64 5.1 (OSF/1) |
ln10jaof(8) |
Filter for the Japanese DEClaser 2400 printer |
| Tru64 5.1 (OSF/1) |
ln14of(8) |
ASCII to PostScript translation filter |
| Tru64 5.1 (OSF/1) |
lockd(8) |
Network lock daemon |
| Tru64 5.1 (OSF/1) |
log(8) |
Records input and output from a program |
| Tru64 5.1 (OSF/1) |
lpc(8) |
Line printer control program |
| Tru64 5.1 (OSF/1) |
lpd(8) |
line printer daemon |
| Tru64 5.1 (OSF/1) |
lprsetup(8) |
printer spooler set up program |
| Tru64 5.1 (OSF/1) |
lptest(8) |
Generates the line printer ripple test pattern |
| Tru64 5.1 (OSF/1) |
lsm(8) |
Introduction to Logical Storage Manager (LSM) terms and commands |
| Tru64 5.1 (OSF/1) |
lsmbstartup(8) |
Starts the Logical Storage Manager (LSM) during system reboot |
| Tru64 5.1 (OSF/1) |
lsmsa(8) |
Starts the Storage Administrator (SA) graphical user interface (GUI) |
| Tru64 5.1 (OSF/1) |
lsmsad(8) |
Starts the Storage Administrator (SA) daemon |
| Tru64 5.1 (OSF/1) |
lsmsetup(8) |
Initializes Logical Storage Manager (LSM) by creating the rootdg disk group |
| Tru64 5.1 (OSF/1) |
mailauth(8) |
manipulate alternate authorization database for Post Office Protocol (POP), Internet Message Access Protocol (IMAP), and APOP users. |
| Tru64 5.1 (OSF/1) |
mailconfig(8) |
Sets up the routing and delivery of mail for the system. |
| Tru64 5.1 (OSF/1) |
mailq(8) |
Sends mail over the Internet |
| Tru64 5.1 (OSF/1) |
mailsetup(8) |
Configures the host's mail system |
| Tru64 5.1 (OSF/1) |
mailstats(8) |
Displays statistics about mail traffic |
| Tru64 5.1 (OSF/1) |
mailusradm(8) |
Administer User Mail |
| Tru64 5.1 (OSF/1) |
makedbm(8) |
Makes a Network Information Service (NIS) dbm file |
| Tru64 5.1 (OSF/1) |
makekey(8) |
generate encryption key |
| Tru64 5.1 (OSF/1) |
makemap(8) |
Create database maps for sendmail |
| Tru64 5.1 (OSF/1) |
map-mbone(8) |
Multicast connection mapper |
| Tru64 5.1 (OSF/1) |
memx(8) |
memory exerciser |
| Tru64 5.1 (OSF/1) |
mfs(8) |
Constructs a new UFS file system |
| Tru64 5.1 (OSF/1) |
migrate(8) |
Move a file or file pages to another volume in an AdvFS file domain |
| Tru64 5.1 (OSF/1) |
mkcdsl(8) |
Make a context-dependent symbolic link (CDSL) |
| Tru64 5.1 (OSF/1) |
mkfdmn(8) |
Creates a new AdvFS file domain |
| Tru64 5.1 (OSF/1) |
mkfset(8) |
Create a fileset in an existing AdvFS file domain |
| Tru64 5.1 (OSF/1) |
mkisofs(8) |
Create a ISO9660 filesystem with optional Rock Ridge attributes. |
| Tru64 5.1 (OSF/1) |
mklost+found(8) |
Makes a lost+found directory for fsck |
| Tru64 5.1 (OSF/1) |
mknod(8) |
Creates a special file |
| Tru64 5.1 (OSF/1) |
mkpasswd(8) |
Creates a version of the basic user database organized for efficient searches |
| Tru64 5.1 (OSF/1) |
mkproto(8) |
Constructs a prototype file system |
| Tru64 5.1 (OSF/1) |
monacct(8) |
Provide accounting commands for shell scripts |
| Tru64 5.1 (OSF/1) |
mosy(8) |
The managed object syntax compiler. |
| Tru64 5.1 (OSF/1) |
mount(8) |
Mounts and unmounts file systems |
| Tru64 5.1 (OSF/1) |
mountd(8) |
Services remote NFS compatible mount requests |
| Tru64 5.1 (OSF/1) |
mountlist(8) |
Checks for mounted AdvFS filesets |
| Tru64 5.1 (OSF/1) |
mrinfo(8) |
Displays configuration information from a multicast router |
| Tru64 5.1 (OSF/1) |
mrouted(8) |
IP multicast routing daemon |
| Tru64 5.1 (OSF/1) |
mtrace(8) |
Print multicast path from a source to a receiver |
| Tru64 5.1 (OSF/1) |
mtu(8) |
POLYCENTER Common Agent MIB Translator Utility |
| Tru64 5.1 (OSF/1) |
named-xfer(8) |
Pulls BIND zones from another server |
| Tru64 5.1 (OSF/1) |
named(8) |
Internet domain name server (DNS) |
| Tru64 5.1 (OSF/1) |
ncheck(8) |
lists i-number or tag and path name for files in a local file system. |
| Tru64 5.1 (OSF/1) |
nd6hostd(8) |
Neighbor discovery and autoconfiguration daemon for IPv6 hosts |
| Tru64 5.1 (OSF/1) |
netconfig(8) |
Launches the SysMan Menu to the Network Setup Wizard |
| Tru64 5.1 (OSF/1) |
newaliases(8) |
Sends mail over the Internet |
| Tru64 5.1 (OSF/1) |
newfs(8) |
Constructs a new UFS file system |
| Tru64 5.1 (OSF/1) |
nfsconfig(8) |
Launches the SysMan Menu at the Network File System Configuration (NFS) level, where you can configure a system as an NFS server or as an NFS client |
| Tru64 5.1 (OSF/1) |
nfsd(8) |
The remote NFS compatible server |
| Tru64 5.1 (OSF/1) |
nfsiod(8) |
The local NFS compatible asynchronous I/O daemon |
| Tru64 5.1 (OSF/1) |
nfslogsum(8) |
Summarize nfswatch log file |
| Tru64 5.1 (OSF/1) |
nfsportmon(8) |
Turns the port monitor on or off |
| Tru64 5.1 (OSF/1) |
nfsstat(8) |
Network File System statistics |
| Tru64 5.1 (OSF/1) |
nfswatch(8) |
Monitor an NFS server |
| Tru64 5.1 (OSF/1) |
niffconfig(8) |
Configuration program for the Network Interface Failure Finder (NIFF) |
| Tru64 5.1 (OSF/1) |
niffd(8) |
Network Interface Failure Finder daemon |
| Tru64 5.1 (OSF/1) |
nissetup(8) |
Sets up the Network Information Service (NIS) environment |
| Tru64 5.1 (OSF/1) |
nslookup(8) |
Queries Internet name servers interactively |
| Tru64 5.1 (OSF/1) |
ntalkd(8) |
The remote communications server for the talk command |
| Tru64 5.1 (OSF/1) |
ntpdate(8) |
set the date and time via NTP (Network Time Protocol) |
| Tru64 5.1 (OSF/1) |
ntpq(8) |
Network Time Protocol (NTP) monitor program for xntpd |
| Tru64 5.1 (OSF/1) |
ntptrace(8) |
Traces a chain of NTP hosts back to their master time source |
| Tru64 5.1 (OSF/1) |
nulladm(8) |
Provide accounting commands for shell scripts |
| Tru64 5.1 (OSF/1) |
nvbmtpg(8) |
Display pages of an AdvFS BMT file |
| Tru64 5.1 (OSF/1) |
nvfragpg(8) |
Display the pages of an AdvFS frag file |
| Tru64 5.1 (OSF/1) |
nvlogpg(8) |
Display the log file of an AdvFS file domain |
| Tru64 5.1 (OSF/1) |
nvtagpg(8) |
Displays a disk block formatted as a tag directory |
| Tru64 5.1 (OSF/1) |
odld(8) |
Daemon that supports the Software On-Demand Loading (SoftODL) service |
| Tru64 5.1 (OSF/1) |
offline(8) |
Stops and starts processors in a multiprocessor system |
| Tru64 5.1 (OSF/1) |
ogated(8) |
The gateway routing daemon |
| Tru64 5.1 (OSF/1) |
online(8) |
Stops and starts processors in a multiprocessor system |
| Tru64 5.1 (OSF/1) |
os_mibs(8) |
Tru64 UNIX extensible SNMP subagent daemon |
| Tru64 5.1 (OSF/1) |
ospf_monitor(8) |
Monitors OSPF gateways |
| Tru64 5.1 (OSF/1) |
pac(8) |
Outputs printer/plotter accounting information |
| Tru64 5.1 (OSF/1) |
pcfof(8) |
Generic print filter for ANSI, PCL, and multi-language PostScript printers |
| Tru64 5.1 (OSF/1) |
pcnfsd(8) |
The (PC)NFS authentication and print request server |
| Tru64 5.1 (OSF/1) |
pfconfig(8) |
Configure packet filter parameters |
| Tru64 5.1 (OSF/1) |
ping(8) |
Sends ICMP ECHO_REQUEST packets to network hosts |
| Tru64 5.1 (OSF/1) |
pmerge(8) |
Builds a network bootable kernel. |
| Tru64 5.1 (OSF/1) |
pmgrd(8) |
The Performance Manager metrics server daemon |
| Tru64 5.1 (OSF/1) |
pop3d(8) |
POP3 server |
| Tru64 5.1 (OSF/1) |
popcv(8) |
Migrate passwords from the /var/spool/pop/POP file to the mailauth database |
| Tru64 5.1 (OSF/1) |
portmap(8) |
The DARPA port to RPC program number mapper |
| Tru64 5.1 (OSF/1) |
post(8) |
deliver a message |
| Tru64 5.1 (OSF/1) |
ppdof(8) |
Text to PostScript translation filter |
| Tru64 5.1 (OSF/1) |
pppd(8) |
Point-to-Point Protocol (PPP) daemon |
| Tru64 5.1 (OSF/1) |
pppstats(8) |
Print Point-to-Point Protocol (PPP) statistics |
| Tru64 5.1 (OSF/1) |
prctmp(8) |
Provide accounting commands for shell scripts |
| Tru64 5.1 (OSF/1) |
prdaily(8) |
Provide accounting commands for shell scripts |
| Tru64 5.1 (OSF/1) |
presto(8) |
Controls and monitors the Prestoserve file system accelerator |
| Tru64 5.1 (OSF/1) |
prestoctl_svc(8) |
Prestoserve control daemon |
| Tru64 5.1 (OSF/1) |
prestosetup(8) |
Configures the Prestoserve software |
| Tru64 5.1 (OSF/1) |
printconfig(8) |
Used to add, delete, or modify printer configurations |
| Tru64 5.1 (OSF/1) |
printpw(8) |
Outputs the contents of the password database |
| Tru64 5.1 (OSF/1) |
probenis(8) |
Probes for existence of NIS server |
| Tru64 5.1 (OSF/1) |
proplistd(8) |
Services remote NFS compatible property list requests |
| Tru64 5.1 (OSF/1) |
protect_headers_setup(8) |
Sets up header files for the -protect_headers feature in cc, cxx, and cpp |
| Tru64 5.1 (OSF/1) |
prpasswdd(8) |
Enhanced security daemon |
| Tru64 5.1 (OSF/1) |
prtacct(8) |
Provide accounting commands for shell scripts |
| Tru64 5.1 (OSF/1) |
ps_level1of(8) |
ASCII to PostScript translation filter |
| Tru64 5.1 (OSF/1) |
ps_level2of(8) |
ASCII to PostScript translation filter |
| Tru64 5.1 (OSF/1) |
psradm(8) |
Stops and starts processors in a multiprocessor system |
| Tru64 5.1 (OSF/1) |
pwck(8) |
Checks the password and group files for inconsistencies |
| Tru64 5.1 (OSF/1) |
quot(8) |
Displays information about user files |
| Tru64 5.1 (OSF/1) |
quotacheck(8) |
Checks file system quota consistency |
| Tru64 5.1 (OSF/1) |
quotaoff(8) |
turns quota enforcement on or off |
| Tru64 5.1 (OSF/1) |
quotaon(8) |
turns quota enforcement on or off |
| Tru64 5.1 (OSF/1) |
radisk(8) |
Digital Storage Architecture (DSA) disk maintenance program |
| Tru64 5.1 (OSF/1) |
rarpd(8) |
Reverse address resolution protocol (RARP) daemon |
| Tru64 5.1 (OSF/1) |
rc.config(8) |
Gets, sets, or deletes runtime configuration variables stored in the files /etc/rc.config, /etc/rc.config.common, and /etc/rc.config.site |
| Tru64 5.1 (OSF/1) |
rc0(8) |
Runs command script executed when stopping the system |
| Tru64 5.1 (OSF/1) |
rc2(8) |
Run command script executed when entering a multiuser run level |
| Tru64 5.1 (OSF/1) |
rc3(8) |
Run command script executed when entering a multiuser run level |
| Tru64 5.1 (OSF/1) |
rcinet(8) |
Restarts, starts, or stops Internet network services on the system |
| Tru64 5.1 (OSF/1) |
rcmgr(8) |
Gets, sets, or deletes runtime configuration variables stored in the files /etc/rc.config, /etc/rc.config.common, and /etc/rc.config.site |
| Tru64 5.1 (OSF/1) |
rdate(8) |
network date client |
| Tru64 5.1 (OSF/1) |
rdistd(8) |
Remote file distribution server program |
| Tru64 5.1 (OSF/1) |
rdump(8) |
Performs incremental file system dumps |
| Tru64 5.1 (OSF/1) |
reboot(8) |
Restarts the machine |
| Tru64 5.1 (OSF/1) |
reconstruct(8) |
Reconstructs IMAP mailboxes |
| Tru64 5.1 (OSF/1) |
remove(8) |
Provide accounting commands for shell scripts |
| Tru64 5.1 (OSF/1) |
removeuser(8) |
Deletes user accounts interactively |
| Tru64 5.1 (OSF/1) |
renamefset(8) |
Rename an existing AdvFS fileset |
| Tru64 5.1 (OSF/1) |
renice(8) |
Alters the priority of a running process |
| Tru64 5.1 (OSF/1) |
repquota(8) |
summarizes file system quotas |
| Tru64 5.1 (OSF/1) |
restore(8) |
Restores files from tapes written with the dump or rdump command, respectively |
| Tru64 5.1 (OSF/1) |
rexecd(8) |
The remote execution server |
| Tru64 5.1 (OSF/1) |
ripquery(8) |
Queries RIP gateways |
| Tru64 5.1 (OSF/1) |
ris(8) |
Remote installation services (RIS) utility |
| Tru64 5.1 (OSF/1) |
rlogind(8) |
The remote login server |
| Tru64 5.1 (OSF/1) |
rmfdmn(8) |
removes a file domain |
| Tru64 5.1 (OSF/1) |
rmfset(8) |
Removes a fileset or a clone fileset from an AdvFS file domain |
| Tru64 5.1 (OSF/1) |
rmt(8) |
Allows remote access to magnetic tape devices |
| Tru64 5.1 (OSF/1) |
rmvol(8) |
Removes a volume from an existing file domain |
| Tru64 5.1 (OSF/1) |
route(8) |
Manipulates the routing tables manually |
| Tru64 5.1 (OSF/1) |
routed(8) |
Manages network routing tables |
| Tru64 5.1 (OSF/1) |
rpc.lockd(8) |
Network lock daemon |
| Tru64 5.1 (OSF/1) |
rpc.pcnfsd(8) |
The (PC)NFS authentication and print request server |
| Tru64 5.1 (OSF/1) |
rpc.rquotad(8) |
Remote quota server |
| Tru64 5.1 (OSF/1) |
rpc.rstatd(8) |
Kernel statistics server |
| Tru64 5.1 (OSF/1) |
rpc.rusersd(8) |
Network username server |
| Tru64 5.1 (OSF/1) |
rpc.rwalld(8) |
Network rwall server |
| Tru64 5.1 (OSF/1) |
rpc.sprayd(8) |
Spray server |
| Tru64 5.1 (OSF/1) |
rpc.statd(8) |
Network status monitor daemon |
| Tru64 5.1 (OSF/1) |
rpc.yppasswdd(8) |
server daemon for modifying the Network Information Service (NIS) password file |
| Tru64 5.1 (OSF/1) |
rpcinfo(8) |
report remote procedure call (RPC) information |
| Tru64 5.1 (OSF/1) |
rquotad(8) |
Remote quota server |
| Tru64 5.1 (OSF/1) |
rrestore(8) |
Restores files from tapes written with the dump or rdump command, respectively |
| Tru64 5.1 (OSF/1) |
rshd(8) |
The remote shell server |
| Tru64 5.1 (OSF/1) |
rstatd(8) |
Kernel statistics server |
| Tru64 5.1 (OSF/1) |
rsvpd(8) |
Resource ReSerVation Protocol (RSVP) daemon |
| Tru64 5.1 (OSF/1) |
rsvpstat(8) |
Display resource reservation status |
| Tru64 5.1 (OSF/1) |
runacct(8) |
Runs daily accounting |
| Tru64 5.1 (OSF/1) |
runsyscheck(8) |
Generates system configuration information and analysis |
| Tru64 5.1 (OSF/1) |
rusersd(8) |
Network username server |
| Tru64 5.1 (OSF/1) |
rvdump(8) |
Performs full and incremental backups on filesets |
| Tru64 5.1 (OSF/1) |
rvrestore(8) |
Restores files from savesets that are produced by vdump and rvdump |
| Tru64 5.1 (OSF/1) |
rwalld(8) |
Network rwall server |
| Tru64 5.1 (OSF/1) |
rwhod(8) |
The system status server |
| Tru64 5.1 (OSF/1) |
sa(8) |
Summarizes accounting records |
| Tru64 5.1 (OSF/1) |
salvage(8) |
Recover file data from damaged AdvFS file domains |
| Tru64 5.1 (OSF/1) |
savecore(8) |
Copies a core dump from swap partitions to a file |
| Tru64 5.1 (OSF/1) |
savemeta(8) |
Takes a snapshot of an AdvFS domain's metadata |
| Tru64 5.1 (OSF/1) |
screend(8) |
Internet (IP) gateway screening daemon |
| Tru64 5.1 (OSF/1) |
screenmode(8) |
Enable or disable gateway screening |
| Tru64 5.1 (OSF/1) |
screenstat(8) |
Show gateway screening statistics |
| Tru64 5.1 (OSF/1) |
scsimgr(8) |
manage SCSI devices and device databases |
| Tru64 5.1 (OSF/1) |
scu(8) |
SCSI CAM Utility Program |
| Tru64 5.1 (OSF/1) |
secauthmigrate(8) |
Convert ULTRIX auth(5) authentication data to authcap(4) authentication data (Enhanced Security) |
| Tru64 5.1 (OSF/1) |
secconfig(8) |
Security features setup graphical interface (Enhanced Security) |
| Tru64 5.1 (OSF/1) |
secsetup(8) |
Security features setup graphical interface (Enhanced Security) |
| Tru64 5.1 (OSF/1) |
sendmail(8) |
Sends mail over the Internet |
| Tru64 5.1 (OSF/1) |
sendmail.m4(8) |
Introduction to using m4 macros to create a sendmail.cf configuration file |
| Tru64 5.1 (OSF/1) |
setld(8) |
Software subset management utility |
| Tru64 5.1 (OSF/1) |
settz(8) |
|
| Tru64 5.1 (OSF/1) |
setup(8) |
invokes a system setup menu for console and workstation displays without graphics capabilities |
| Tru64 5.1 (OSF/1) |
shblk(8) |
Displays disk blocks, as unformatted hexadecimal numbers |
| Tru64 5.1 (OSF/1) |
shfragbf(8) |
displays frag file information |
| Tru64 5.1 (OSF/1) |
shleases(8) |
Displays a DHCP client's IP address leases. |
| Tru64 5.1 (OSF/1) |
shmx(8) |
shared memory exerciser |
| Tru64 5.1 (OSF/1) |
showdbs(8) |
Display the contents of DHCP server's dynamic database |
| Tru64 5.1 (OSF/1) |
showdhc(8) |
Displays the contents of DHCP client configuration files |
| Tru64 5.1 (OSF/1) |
showfdmn(8) |
Display attributes of an AdvFS file domain |
| Tru64 5.1 (OSF/1) |
showfile(8) |
displays the attributes of AdvFS directories and files |
| Tru64 5.1 (OSF/1) |
showfsets(8) |
Display information about filesets in an AdvFS file domain |
| Tru64 5.1 (OSF/1) |
showmount(8) |
Shows remote NFS compatible mounts on a host |
| Tru64 5.1 (OSF/1) |
shutacct(8) |
Provide accounting commands for shell scripts |
| Tru64 5.1 (OSF/1) |
shutdown(8) |
Shuts down a single system or an entire cluster |
| Tru64 5.1 (OSF/1) |
siacfg(8) |
Update a matrix.conf file for adding or removing SIA mechanisms |
| Tru64 5.1 (OSF/1) |
siainit(8) |
SIA (Security Integration Architecture) initialization command |
| Tru64 5.1 (OSF/1) |
simd(8) |
Daemon that supports the software phrase input method (SIM) service |
| Tru64 5.1 (OSF/1) |
sizer(8) |
Displays information about the system or kernel, or creates a system configuration file |
| Tru64 5.1 (OSF/1) |
slattach(8) |
Attaches a serial line to a network interface |
| Tru64 5.1 (OSF/1) |
smsd(8) |
The SysMan Station daemon |
| Tru64 5.1 (OSF/1) |
smtpd(8) |
Sends mail over the Internet |
| Tru64 5.1 (OSF/1) |
snmp_request(8) |
Sends SNMPv1 and SNMPv2 request PDUs to an agent and prints the agent's response |
| Tru64 5.1 (OSF/1) |
snmp_traprcv(8) |
A program that listens for SNMP trap messages and prints any it receives |
| Tru64 5.1 (OSF/1) |
snmp_trapsnd(8) |
A program that sends SNMPv1 and SNMPv2 traps |
| Tru64 5.1 (OSF/1) |
snmpd(8) |
Simple Network Management Protocol (SNMP) agent daemon |
| Tru64 5.1 (OSF/1) |
snmpd.conf(8) |
Simple Network Management Protocol (SNMP) agent daemon |
| Tru64 5.1 (OSF/1) |
snmpi(8) |
The extensible SNMP subagent data initializer |
| Tru64 5.1 (OSF/1) |
spray(8) |
Spray packets |
| Tru64 5.1 (OSF/1) |
sprayd(8) |
Spray server |
| Tru64 5.1 (OSF/1) |
srconfig(8) |
Displays and controls source routing functions and parameters for communication on token ring networks |
| Tru64 5.1 (OSF/1) |
sshd-check-conf(8) |
|
| Tru64 5.1 (OSF/1) |
sshd(8) |
|
| Tru64 5.1 (OSF/1) |
sshd2(8) |
|
| Tru64 5.1 (OSF/1) |
startppp(8) |
Starts the pppd daemon for PPP dial-in connections |
| Tru64 5.1 (OSF/1) |
startslip(8) |
Configures SLIP connections |
| Tru64 5.1 (OSF/1) |
startup(8) |
Provide accounting commands for shell scripts |
| Tru64 5.1 (OSF/1) |
statd(8) |
Network status monitor daemon |
| Tru64 5.1 (OSF/1) |
strace(8) |
Writes STREAMS event trace messages to standard output |
| Tru64 5.1 (OSF/1) |
strclean(8) |
Removes outdated STREAMS error log files |
| Tru64 5.1 (OSF/1) |
strerr(8) |
Receives error messages from the STREAMS log driver |
| Tru64 5.1 (OSF/1) |
stripe(8) |
Stripes a file across several volumes in a file domain |
| Tru64 5.1 (OSF/1) |
strsetup(8) |
STREAMS setup and information command |
| Tru64 5.1 (OSF/1) |
sulogin(8) |
single-user login program (Enhanced Security) |
| Tru64 5.1 (OSF/1) |
svcsetup(8) |
set up the svc.conf file |
| Tru64 5.1 (OSF/1) |
swapon(8) |
Specifies additional disk partitions for paging and swapping |
| Tru64 5.1 (OSF/1) |
switchlog(8) |
moves an AdvFS file domain transaction log |
| Tru64 5.1 (OSF/1) |
sync(8) |
Flush file system metadata and data from memory buffers to disk. |
| Tru64 5.1 (OSF/1) |
sys_check(8) |
Generates system configuration information and analysis |
| Tru64 5.1 (OSF/1) |
sysconfig(8) |
Maintains the kernel subsystem configuration |
| Tru64 5.1 (OSF/1) |
sysconfigdb(8) |
Manage the subsystem configuration database |
| Tru64 5.1 (OSF/1) |
syslogd(8) |
Logs system messages |
| Tru64 5.1 (OSF/1) |
sysman(8) |
Front end command used to invoke several SysMan services |
| Tru64 5.1 (OSF/1) |
sysman_cli(8) |
li - Command line interface to SysMan system management data. |
| Tru64 5.1 (OSF/1) |
sysman_clone(8) |
Saves SysMan configuration information, which can be used to clone configurations on similar systems |
| Tru64 5.1 (OSF/1) |
sysman_intro(8) |
Introduction of SysMan applications |
| Tru64 5.1 (OSF/1) |
sysman_menu(8) |
Graphical interface to run system management tasks |
| Tru64 5.1 (OSF/1) |
sysman_station(8) |
Graphical interface for the SysMan Station |
| Tru64 5.1 (OSF/1) |
tag2name(8) |
Display the path name of an AdvFS file |
| Tru64 5.1 (OSF/1) |
talkd(8) |
The remote communications server for the talk command |
| Tru64 5.1 (OSF/1) |
tapex(8) |
Tape exerciser program |
| Tru64 5.1 (OSF/1) |
tcpdump(8) |
Dump traffic on a network |
| Tru64 5.1 (OSF/1) |
tcpslice(8) |
Extracts sections of or merges tcpdump files |
| Tru64 5.1 (OSF/1) |
telnetd(8) |
The DARPA telnet protocol server |
| Tru64 5.1 (OSF/1) |
tftpd(8) |
The DARPA Trivial File Transfer Protocol (TFTP) server |
| Tru64 5.1 (OSF/1) |
thailpof(8) |
Generic filter for printing Thai text files |
| Tru64 5.1 (OSF/1) |
timed(8) |
The network time daemon |
| Tru64 5.1 (OSF/1) |
timedc(8) |
Controls the timed daemon |
| Tru64 5.1 (OSF/1) |
timedsetup(8) |
Performs initial setup of the time server daemon (timed). |
| Tru64 5.1 (OSF/1) |
timezone(8) |
Sets timezone information. |
| Tru64 5.1 (OSF/1) |
traceroute(8) |
Prints the route that packets take to a network host |
| Tru64 5.1 (OSF/1) |
trpt(8) |
Transliterates protocol trace |
| Tru64 5.1 (OSF/1) |
tunefs(8) |
Tunes an existing UFS file system |
| Tru64 5.1 (OSF/1) |
turnacct(8) |
Provide accounting commands for shell scripts |
| Tru64 5.1 (OSF/1) |
udelta(8) |
print differences between two subset inventories |
| Tru64 5.1 (OSF/1) |
udetect(8) |
Find subset files that have changed since installation |
| Tru64 5.1 (OSF/1) |
uerf(8) |
Event report formatter |
| Tru64 5.1 (OSF/1) |
ufs_fsck(8) |
Check and repair UFS file systems |
| Tru64 5.1 (OSF/1) |
umount(8) |
Mounts and unmounts file systems |
| Tru64 5.1 (OSF/1) |
undohash(8) |
Hashes or unhashes IMAP configuration directories |
| Tru64 5.1 (OSF/1) |
updadmin(8) |
Invokes the Update Installation Cleanup utility to remove or archive backup files created by an Update Installation |
| Tru64 5.1 (OSF/1) |
update(8) |
Periodically updates the file system |
| Tru64 5.1 (OSF/1) |
updmerge(8) |
DO NOT USE THE updmerge UTILITY! |
| Tru64 5.1 (OSF/1) |
updmv(8) |
Moves customized, user, and inventory data files to or from storage. |
| Tru64 5.1 (OSF/1) |
useradd(8) |
Adds a new user login account |
| Tru64 5.1 (OSF/1) |
userdel(8) |
Deletes a user login account from the system. |
| Tru64 5.1 (OSF/1) |
usermod(8) |
Modifies a user's login information on the system. |
| Tru64 5.1 (OSF/1) |
usync(8) |
synchronize two setld inventory files to reflect current system status |
| Tru64 5.1 (OSF/1) |
utxd(8) |
Daemon that spawns service daemons used by the Asian terminal driver |
| Tru64 5.1 (OSF/1) |
uucheck(8) |
Checks for files and directories required by uucp |
| Tru64 5.1 (OSF/1) |
uucico(8) |
Transfers uucp command, data, and execute files to remote systems |
| Tru64 5.1 (OSF/1) |
uucleanup(8) |
Deletes selected old files from the uucp spool directory |
| Tru64 5.1 (OSF/1) |
uucpd(8) |
Manages communications between the uucp program and TCP/IP |
| Tru64 5.1 (OSF/1) |
uucpsetup(8) |
The uucp setup program |
| Tru64 5.1 (OSF/1) |
uugetty(8) |
Sets the terminal type, modes, speed, and line. |
| Tru64 5.1 (OSF/1) |
uumonitor(8) |
Monitors the UUCP system |
| Tru64 5.1 (OSF/1) |
uusched(8) |
Schedules work for the file transport program |
| Tru64 5.1 (OSF/1) |
vdf(8) |
Display disk information for AdvFS domains and filesets |
| Tru64 5.1 (OSF/1) |
vdump(8) |
Performs full and incremental backups on filesets |
| Tru64 5.1 (OSF/1) |
verify(8) |
Checks the AdvFS on-disk metadata structures |
| Tru64 5.1 (OSF/1) |
versw(8) |
Manages the transition from the active version of the operating system to a new version |
| Tru64 5.1 (OSF/1) |
vfilepg(8) |
Display pages of an AdvFS file |
| Tru64 5.1 (OSF/1) |
vipw(8) |
Edits the /etc/passwd file |
| Tru64 5.1 (OSF/1) |
volassist(8) |
Interface to create, mirror, back up, grow, shrink, and move LSM volumes |
| Tru64 5.1 (OSF/1) |
vold(8) |
Logical Storage Manager configuration daemon |
| Tru64 5.1 (OSF/1) |
voldctl(8) |
Controls the volume configuration daemon |
| Tru64 5.1 (OSF/1) |
voldg(8) |
Manages Logical Storage Manager disk groups |
| Tru64 5.1 (OSF/1) |
voldisk(8) |
Defines and manages Logical Storage Manager disks |
| Tru64 5.1 (OSF/1) |
voldiskadd(8) |
Adds one or more disks for use with the Logical Storage Manager |
| Tru64 5.1 (OSF/1) |
voldiskadm(8) |
Menu interface for LSM disk administration |
| Tru64 5.1 (OSF/1) |
voldisksetup(8) |
Sets up a disk for use with the Logical Storage Manager (LSM) |
| Tru64 5.1 (OSF/1) |
voledit(8) |
Creates, removes, and modifies Logical Storage Manager (LSM) records |
| Tru64 5.1 (OSF/1) |
volencap(8) |
Encapsulates disks, partitions, or AdvFS domains |
| Tru64 5.1 (OSF/1) |
volevac(8) |
Evacuates all volumes from a disk |
| Tru64 5.1 (OSF/1) |
volinfo(8) |
Print accessibility and usability of volumes |
| Tru64 5.1 (OSF/1) |
volinstall(8) |
Sets up Logical Storage Manager (LSM) environment after LSM installation |
| Tru64 5.1 (OSF/1) |
volintro(8) |
Introduction to Logical Storage Manager (LSM) terms and commands |
| Tru64 5.1 (OSF/1) |
voliod(8) |
Start, stop, and report on Logical Storage Manager kernel daemons |
| Tru64 5.1 (OSF/1) |
vollogcnvt(8) |
Logical Storage Manager BCL-to-DRL logging conversion utility |
| Tru64 5.1 (OSF/1) |
volmake(8) |
Create Logical Storage Manager objects |
| Tru64 5.1 (OSF/1) |
volmend(8) |
Mends simple problems in configuration records |
| Tru64 5.1 (OSF/1) |
volmigrate(8) |
|
| Tru64 5.1 (OSF/1) |
volmirror(8) |
Mirrors volumes on a disk or control default mirroring |
| Tru64 5.1 (OSF/1) |
volnotify(8) |
Display Logical Storage Manager configuration events |
| Tru64 5.1 (OSF/1) |
volplex(8) |
Perform Logical Storage Manager operations on plexes |
| Tru64 5.1 (OSF/1) |
volprint(8) |
Displays records from the Logical Storage Manager configuration |
| Tru64 5.1 (OSF/1) |
volreattach(8) |
Reattaches disk drives that have once again become accessible |
| Tru64 5.1 (OSF/1) |
volreconfig(8) |
Encapsulates disks, partitions, or AdvFS domains |
| Tru64 5.1 (OSF/1) |
volrecover(8) |
Performs volume recovery operations |
| Tru64 5.1 (OSF/1) |
volrestore(8) |
Restores a complete or partial Logical Storage Manager (LSM) configuration |
| Tru64 5.1 (OSF/1) |
volrootmir(8) |
Mirror areas necessary for booting to a new disk |
| Tru64 5.1 (OSF/1) |
volsave(8) |
Saves a Logical Storage Manager (LSM) configuration |
| Tru64 5.1 (OSF/1) |
volsd(8) |
Perform Logical Storage Manager operations on subdisks |
| Tru64 5.1 (OSF/1) |
volsetup(8) |
Initializes Logical Storage Manager (LSM) by creating the rootdg disk group |
| Tru64 5.1 (OSF/1) |
volstat(8) |
Logical Storage Manager statistics management utility |
| Tru64 5.1 (OSF/1) |
voltrace(8) |
Trace operations on volumes |
| Tru64 5.1 (OSF/1) |
volume(8) |
Performs Logical Storage Manager operations on volumes |
| Tru64 5.1 (OSF/1) |
volunmigrate(8) |
|
| Tru64 5.1 (OSF/1) |
volunroot(8) |
Remove Logical Storage Manager hooks for rootable volumes |
| Tru64 5.1 (OSF/1) |
volwatch(8) |
Monitors the Logical Storage Manager (LSM) for failure events and performs hot sparing |
| Tru64 5.1 (OSF/1) |
vrestore(8) |
Restores files from savesets that are produced by vdump and rvdump |
| Tru64 5.1 (OSF/1) |
vsbmpg(8) |
Display a page from a Storage Bitmap (SBM) file |
| Tru64 5.1 (OSF/1) |
w2ksetup(8) |
Setup script for Windows 2000 Single Sign On |
| Tru64 5.1 (OSF/1) |
wnn(8) |
Sets up the 8-bit option for sendmail and the Wnn character-cell input method for Japanese |
| Tru64 5.1 (OSF/1) |
writesrv(8) |
Lets users send messages to and receive messages from a remote system. |
| Tru64 5.1 (OSF/1) |
wtmpconvert(8) |
Modify connect time accounting records from DIGITAL UNIX releases 4.0x and prior to new format |
| Tru64 5.1 (OSF/1) |
wtmpfix(8) |
Modify connect time accounting records to change formats and to make corrections in the records |
| Tru64 5.1 (OSF/1) |
wwconfig(8) |
Configures tty features for Asian countries |
| Tru64 5.1 (OSF/1) |
wwpsof(8) |
Generic I18N (internationalized) print filter for PostScript printers |
| Tru64 5.1 (OSF/1) |
wwsetup(8) |
Sets up the 8-bit option for sendmail and the Wnn character-cell input method for Japanese |
| Tru64 5.1 (OSF/1) |
xjoin(8) |
Graphical user interface program to configure DHCP server |
| Tru64 5.1 (OSF/1) |
xntpd(8) |
Network Time Protocol (NTP) daemon |
| Tru64 5.1 (OSF/1) |
xntpdc(8) |
Monitor and control program for the Network Time Protocol daemon |
| Tru64 5.1 (OSF/1) |
ypbind(8) |
Network Information Service (NIS) server and binder processes |
| Tru64 5.1 (OSF/1) |
ypmake(8) |
rebuild Network Information Service (NIS) database using the make command |
| Tru64 5.1 (OSF/1) |
yppasswdd(8) |
server daemon for modifying the Network Information Service (NIS) password file |
| Tru64 5.1 (OSF/1) |
yppoll(8) |
determine which version of a Network Information Service (NIS) map is at a master NIS server host |
| Tru64 5.1 (OSF/1) |
yppush(8) |
force propagation of a changed Network Information Service (NIS) map |
| Tru64 5.1 (OSF/1) |
ypserv(8) |
Network Information Service (NIS) server and binder processes |
| Tru64 5.1 (OSF/1) |
ypset(8) |
point ypbind at a particular server |
| Tru64 5.1 (OSF/1) |
ypsetup(8) |
Sets up the Network Information Service (NIS) environment |
| Tru64 5.1 (OSF/1) |
ypxfr(8) |
Transfer a Network Information Service (NIS) map from a NIS server to the local host |
| Tru64 5.1 (OSF/1) |
ypxfrd(8) |
High speed NIS map transfer daemon |
| Tru64 5.1 (OSF/1) |
zdump(8) |
Time zone dumper |
| Tru64 5.1 (OSF/1) |
zeero(8) |
Zero out disks prior to rewrite. |
| Tru64 5.1 (OSF/1) |
zic(8) |
Time zone compiler |
